NISSAN 2012 Quest - Owner's Manual - Manual (Page 192)

Black plate (189,1)
[ Edit: 2011/ 10/ 27 Model: E52-D ]
HOW TO SELECT MENUS ON THE
SCREEN
Vehicle functions are viewed on the display
screen in menus. To select each key item,
highlight the preferred item using the multi-
function controller and push the ENTER button.
Whenever a menu selection is made or menu
item is highlighted, different areas on the screen
provide you with important information. See the
following for details.
1. Header:
Shows the path used to get to the current
screen. (i.e. push SETTING button >
choose “Comfort” menu item.)
2. Menu Selections:
Shows the options to choose within that
menu screen.
3. UP/DOWN Movement indicator:
Shows that the multi-function controller may
be used to move UP/DOWN on the screen
and select more options.
4. Menu Items Counter:
Shows the total number of items listed
across all pages for the current menu (i.e.
3/7).
5. Footer/Information Line:
Provides more information (if available)
about the menu selection currently high-
lighted. (i.e. Adjust head lamp on time after
shut-off.) HOW TO USE STATUS BUTTON
To display the status of the audio, fuel con-
sumption and navigation system (if so
equipped), push the STATUS button. The
following information will appear when the
STATUS button is pushed repeatedly.
Audio and fuel economy ? Audio and Naviga-
tion system (if so equipped)
HOW TO USE BRIGHTNESS CON-
TROL AND DISPLAY ON/OFF BUTTON
Push the “ OFF” button to switch the display
brightness to the daytime mode or the nighttime
mode, and to adjust the display brightness using
the multi-function controller while the indicator is
displayed at the bottom of the screen.
Push and hold the “ OFF” button for more
than 2 seconds to turn the display off. Push the
button again to turn the display on.
. Models without navigation system
The display brightness can also be adjusted
using the brightness UP button (
) or bright-
ness DOWN button ( ).
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-9
VEHICLE INFORMATION AND
SETTINGS (models with center
multi-function control panel)