Windshield wiper/washer switch, Headlight and turn signal control – NISSAN 2010 Maxima - Quick Reference Guide User Manual
Page 6
4
WINDSHIELD WIPER/WASHER SWITCH
The ignition switch must be in the On position to
activate the windshield wipers.
Move the lever to the following positions to operate
the windshield wipers:
1A
intermittent (INT) – Push the lever down.
front wipers operate intermittently and vary in
accordance with vehicle speed. The intermittent
operation speed can be further adjusted by
twisting the time control ring
1B
.
02
Low Speed (LO) – Push the lever down for
continuous low-speed operation of front wipers.
03
High Speed (HI) – Push the lever down for continuous high-speed operation of
front wipers.
04
Mist (MIST) – Lift the lever up for one sweep of the front wipers.
Pull the lever toward you to activate front washer fluid and several sweeps of the wipers.
HEADLIGHT AND TURN SIGNAL CONTROL
TO acTiVaTe THe auTOLiGHT SYSTeM:
Turn the headlight control switch
01
to the AUTO position
to activate the autolight system. The autolight system can:
Turn the headlights on automatically when it is dark.
Turn the headlights off automatically when it is light.
keep the headlights on for 45 seconds after you place the
ignition in the Off position and all doors are closed.
TO deacTiVaTe THe auTOLiGHT SYSTeM:
Turn the headlight control switch
01
to the OFF,
or
position.
HeadLiGHT cOnTROL SWiTcH
Turn the headlight control switch
01
to the
position to turn on the front parking,
tail, license plate and instrument panel lights.
Turn the headlight control switch
01
to the
position to turn on the headlights. all
other lights remain on.
fOG LiGHT OPeRaTiOn (if so equipped)
nOTe: The headlights must be on and the low beams selected for the fog lights to operate.
Turn the switch (inside collar)
02
to the position to turn on the fog lights.
Turn the switch (inside collar)
02
to the OFF position to turn off the fog lights.
1B
04
1A
02
03