NISSAN 2010 Maxima - Quick Reference Guide - Manual (Page 25)

23
8. Your HomeLink ® button should now be programmed. To program the remaining
HomeLink ® buttons for additional door or gate openers, follow steps 2-8 only.
BLUETOOTH ® HANDS-FREE PHONE SYSTEM
(Without Navigation System)
With an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth
® Hands-free Phone System
utilizes Bluetooth ® wireless technology and
voice recognition to provide hands-free
cellular phone communication.
SYSTeM OPeRaTinG TiPS
close all windows. Surrounding noises may
interfere with system operation and performance.
Press the button on the steering wheel to activate voice recognition.
Wait for the tone before speaking.
Begin speaking a command within 5 seconds of the tone.
Speak in a clear and natural voice without pausing between words.
To go back to the previous command, say “Go back” or “correction.”
To cancel a voice recognition session, simply wait 5 seconds, say “cancel” or “Quit,” or
press the button.
To increase or decrease the volume of the voice prompts, push the VOL (volume) control
switch + or – on the steering wheel or turn the POWER/VOLUME knob on the audio
system while the system is responding.
if the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker adaptation Mode. See your Owner’s Manual for detailed information.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used in any menu to hear a list of available commands.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth ® phone.
For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth.
cOnnecTinG YOuR PHOne
To use the hands-free feature, you need to set up, or connect, the system to recognize your
cellular phone(s). five Bluetooth
® -enabled phones can be connected. after setup, the system
automatically connects with a connected phone when the ignition is in the acc or On position,
as long as the phone is on and in the vehicle.
nOTe: Some cellular phones require the user to enable the automatic reconnection feature. Please
refer to the cellular phone manufacturer’s Owner’s Manual for Bluetooth
® setup information.
Bluetooth®
control location