NISSAN 2010 Maxima - Quick Reference Guide - Manual (Page 33)

VOice cOMMand uSaGe
Making a Phone Call
1. Push the switch on the steering wheel. The system
responds with, “Would you like to access Phone,
navigation, information, audio or Help?” The
commands are also displayed on the screen.
2. after the tone, say “PHOne.”
3. The system then displays the four available phone
commands and says: “Please say dial number,
Redial, Phonebook or international call.”
4. after the tone, do one of the following:
Say “diaL nuMBeR” to dial a 7- or 10-digit phone
number only.
Say “VeHicLe PHOneBOOk” to say the voice
tag of one of up to 40 phone numbers you have
stored in the vehicle.
Say “HandSeT PHOneBOOk” to say the name
of one of up to 1,000 contacts downloaded from
your phone handset. (note: The order of contact
information (first name, last name) transferred
depends on the phone manufacturer. The name
must be spoken as shown in the Handset Phonebook list.)
Say “caLL HiSTORY” to select between incoming, outgoing and missed call lists.
Say “inTeRnaTiOnaL caLL” to dial a number longer than 10 digits.
Receiving/Ending a Phone Call
There are no voice commands for receiving or ending a
phone call.
To accept the call, push the switch on the steering
wheel or touch the “answer” key on the display. To
reject the call, touch the “Reject call” key. To hang-up,
push the switch or touch the “Hang-up” key.
Pushing the switch during a connected phone call
will allow you to send digits and special characters.
after speaking the desired digits, press the ENTER
button to send the recognized information.