Canon PowerShot Camera S90 - Manual (Page 152)

Changing Shooting Functions
152
Customizing Display Information
You can change which information is displayed by switching between
custom displays with each press of the
l button.
● Choose [Custom Display], then press the m
button.
● Press the opqr buttons or turn the Ê dial
to select an item and press the m button to
put a mark on items you would like to
display.
X Items with a will display.
● To turn off a custom display, choose or
and press the m button. A mark will
appear.
However, the custom display currently being
used in the shooting screen cannot be turned
off.
Shooting Info
Displays shooting information
(p. 44).
Grid Lines A grid overlays the display.
3:2 Guide
The areas outside the 3:2 range are
grayed out. This area will not print
when printing on paper with a 3:2
aspect ratio.
Histogram
Histogram displays in shooting
modes
G, M, B, D.
If you press the shutter button halfway and return to the shooting screen
from the custom display settings screen, the settings will not be saved.
Gray items can also be set, however, they may not display depending on
the Shooting mode.
CO
PY