Filling station information – FORD 2000 Windstar User Manual
Page 280
Item
Information
Required fuel
Unleaded fuel only - 87 octane
Fuel tank capacity
98.4L (26.0 gallons)
Engine oil capacity-3.0L engine
(includes filter change)
4.3L (4.5 quarts). Use Motorcraft
SAE 5W-30 Super Premium Motor
Oil, Ford specification
WSS-M2C153-G.
Engine oil capacity-3.8L engine
(includes filter change)
4.7L (5.0 quarts). Use Motorcraft
SAE 5W-30 Super Premium Motor
Oil, Ford specification
WSS-M2C153-G.
Tire size and pressure
Refer to the Certification Label on
the driver’s side B-pillar.
Hood release
Pull handle under the left side of
the instrument panel.
Coolant capacity (without rear
heater)
1
14.0L (14.8 quarts)
Coolant capacity (with rear
heater)
1
15.0L (15.9 quarts)
Power steering fluid capacity
Fill to line on reservoir or dipstick.
Use Motorcraft MERCON
ATF.
Automatic transmission fluid
capacity (AX4S)
2
11.6L (12.25 quarts). 13.0L (13.7
quarts). Use Motorcraft
MERCON
V ATF.
1
Use Ford Premium Engine Coolant (green in color). DO NOT USE Ford
Extended Life Engine Coolant (orange in color). Refer to Adding engine
coolant, in the Maintenance and Care chapter.
2
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON
and MERCON V are not interchangeable. DO NOT
mix MERCON
and MERCON V. Refer to your Scheduled Maintenance
Guide to determine the correct service interval.
Filling station information
280