beautypg.com

Severe climates, What you should know about fail-safe cooling, Maintenance and specifications – FORD 2011 Edge v.1 User Manual

Page 342

background image

Fill your engine coolant reservoir as outlined in Adding engine coolant
in this section.

Severe climates

If you drive in extremely cold climates (less than –34°F [–36°C]):
It may be necessary to increase the coolant concentration

above 50%.

NEVER increase the coolant concentration above 60%.
A coolant concentration of 60% will provide freeze point

protection down to -62°F [-52°C]. Increased engine coolant
concentrations above 60% will decrease the overheat
protection characteristics of the engine coolant and may cause
engine damage.

If available, refer to the chart on the coolant container to

ensure the coolant concentration in your vehicle will provide
adequate freeze protection at the temperatures in which you
drive in the winter months.

If you drive in extremely hot climates:
It is still necessary to maintain the coolant concentration

above 40%.

NEVER decrease the coolant concentration below 40%.
A coolant concentration of 40% will provide freeze point

protection down to -12°F [-24°C]. Decreased engine coolant
concentrations below 40% will decrease the corrosion/freeze
protection characteristics of the engine coolant and may cause
engine damage.

If available, refer to the chart on the coolant container to

ensure the coolant concentration in your vehicle will provide
adequate protection at the temperatures in which you drive.

Vehicles driven year-round in non-extreme climates should use a 50/50
mixture of engine coolant and distilled water for optimum cooling system
and engine protection.

What you should know about fail-safe cooling

If the engine coolant supply is depleted, this feature allows the vehicle to
be driven temporarily before incremental component damage is incurred.
The “fail-safe” distance depends on ambient temperatures, vehicle load
and terrain.

Maintenance and Specifications

342

2011 Edge (edg)
Owners Guide, 1st Printing
USA
(fus)