beautypg.com

Easy-access/easy-out feature (if equipped), Seating and safety restraints – FORD 2012 F-150 Raptor v.1 User Manual

Page 169

background image

A memory seat position may be programmed at any time.

To program the memory feature to a remote entry transmitter, refer to
Remote entry system in the Locks and Security chapter.

A programmed memory position can be recalled:
• in any gearshift position if the ignition is not on.
• only in P (Park) or N (Neutral) if the ignition is on.
The memory positions are also recalled when you press your remote
entry transmitter

(unlock) control (if the transmitter is programmed

to a memory position) or, when you enter a valid personal entry code
that is programmed to a memory position. The mirrors will move to the
programmed position and the seat will move to the easy entry position.
The seat will move to the final position when the key is in the ignition (if
easy entry feature is enabled).

Easy-access/easy-out feature (if equipped)

The easy entry feature can be turned off or on through the vehicle
message center. Refer to Message center in the Instrument Cluster
chapter.

The easy entry feature automatically moves the driver’s seat 2 inches
(5 cm) forward when:
• the transmission is in P (Park)
• the key is inserted into the ignition cylinder
(If the seat is located less than 2 inches [5 cm] from the front of the seat
track, the seat will travel up to

1

4

inch (6 mm) to the front of the seat

track).

The easy out feature automatically moves the driver’s seat 2 inches
(5 cm) backward when:
• the transmission is in P (Park)
• the key is removed from the ignition cylinder
(If the seat is located less than 2 inches (5 cm) from the rear of the seat
track, the seat will travel up to

1

4

inch (6 mm) to the rear of the seat

track).

Seating and Safety Restraints

169

2012 F-150 (f12)
Owners Guide, 1st Printing
USA
(fus)

This manual is related to the following products: