Locks and security – FORD 2012 Explorer v.2 User Manual
Page 132
Condition
Potential Causes
I accidentally
programmed all keys as
MyKeys
• Vehicle has a non Ford-approved remote
start system that is recognized as an admin
key. Refer to the Using MyKey
with
remote start systems section to reset all
MyKeys
as admin keys.
No MyKey
function
• An admin intelligent access key is present
at a push-and-start vehicle.
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a non
Ford-approved remote start system (as an
admin key) then a MyKey
is inserted
without restarting the engine.
MyKey
programmed
total includes one
additional key
• Unknown key has been programmed to the
vehicle as a MyKey
.
• Vehicle is equipped with a non
Ford-approved remote start system. Refer to
Using MyKey
with remote start systems
section.
Admin keys
programmed total
includes one additional
key
• Unknown key has been programmed to the
vehicle as admin key.
• Vehicle is equipped with a non
Ford-approved remote start system. Refer to
Using MyKey
with remote start systems
section.
MyKey
distance does
not accumulate
• MyKey is not being used by the intended
user.
• MyKey system has been recently cleared.
• Vehicles has been remote started using a
non Ford-approved remote start system (as
if an admin key) then a MyKey
is inserted
without recycling the MyKey
in ignition.
Locks and Security
132
2012 Explorer (exp)
Owners Guide, 2nd Printing
USA (fus)