Locks and security – FORD 2012 Explorer v.2 User Manual
Page 131
Troubleshooting
Condition
Potential Causes
Can’t create a MyKey
• Key in the ignition is already a MyKey.
• Key in the ignition is the last remaining
admin key (there always has to be at least
one admin key).
• Intelligent access key (if equipped) is not
in the backup slot (for vehicles with push
button start).
• SecuriLock passive anti-theft system is
disabled or in unlimited mode.
• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey
. Refer to Using
MyKey
with remote start systems section.
Cannot program the
MyKey
optional
settings
• Key in the ignition is a MyKey.
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey
. Refer to Using
MyKey
with remote start systems section.
Cannot clear MyKey
• Key in the ignition is a MyKey .
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section.
• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey
. Refer to Using
MyKey
with remote start systems section.
Lost the only admin key
• Purchase a new key from your authorized
dealer.
Lost any key
• For programming spare keys, refer to the
Programming spare keys section in this
chapter.
Locks and Security
131
2012 Explorer (exp)
Owners Guide, 2nd Printing
USA (fus)