Using advancetrac, 178 stability control – FORD 2013 Mustang v.1 User Manual
Page 178

USING ADVANCETRAC
ா
The system automatically is enabled when you start your engine. The
ESC portion of the system is disabled when the transmission is in R
(Reverse) or, on some models, if the stability control button is pressed
and held for more than five seconds when the brakes are applied and the
vehicle is at a stop. The traction control portion of the system can be
turned off independently. See the Traction Control chapter.
AdvanceTrac
Features
Button
functions
Mode
icon
status
ESC
TCS
Default at
start-up
—
On during
bulb
check
Enabled
Enabled
Button pressed
momentarily
Traction
control off
On
Enabled
Disabled
Button pressed
twice; brakes
applied
Sport mode (if
equipped)
On
Enabled
Enabled
Button pressed
and held more
than 5 seconds;
brakes applied;
no throttle
AdvanceTrac
Disabled
On
Disabled
Disabled
Button pressed
again after
deactivation
AdvanceTrac
fully enabled
Off
Enabled
Enabled
Some models may also come equipped with a sport mode which allows
the driver to reduce normal AdvanceTrac
system intervention and
provide a more spirited driving experience. To enter sport mode, press
the stability control button twice rapidly with the brakes applied. The
message appears in the information display that the system is now in
sport mode.
Note: Sport mode is not intended to be used on public roadways.
178
Stability Control
2013 05+ Mustang (197)
Owners Guide gf, 1st Printing
USA (fus)