FORD 2013 F-150 v.3 - Manual (Page 117)

SETUP
LANGUAGE =
ENGLISH /
SPANISH /
FRENCH press the
RESET button English / Spanish / French
• RESET FOR SYSTEM CHECK: The message center will begin to cycle
through the vehicle systems and provide a status of the item if
needed. Some systems show a message only if a condition is present.
• OIL LIFE XXX% displays the remaining oil life. An oil change is required
whenever indicated by the message center and according to the
recommended maintenance schedule. USE ONLY RECOMMENDED
ENGINE OILS.
To reset the oil monitoring system to 100% after each oil change,
perform the following:
1. Press and release the SETUP button to display OIL LIFE XXX% HOLD
RESET = NEW.
2. Press and hold the RESET button for two seconds and release to reset
the oil life to 100%.
Note: To change oil life 100% value (if equipped with this feature) to
another value, proceed to Step 3.
3. Once OIL LIFE SET TO XXX% is displayed, release and press the
RESET button to change the Oil Life Start Value. Each release and press
will reduce the value by 10%.
• UNITS: Displays the current units in English or Metric.
• AUTOLAMP (SEC): This feature keeps your headlights on for up to
three minutes after the ignition is switched off.
• AUTOLOCK: This feature automatically locks all vehicle doors when
the vehicle is shifted into any gear, putting the vehicle in motion.
• AUTOUNLOCK: This feature automatically unlocks all vehicle doors
when the driver’s door is opened within 10 minutes of the ignition
being turned off.
• COURTESY WIPE: This feature allows for an extra swipe of the wipers
after a wipe/wash cycle.
• EASY ENTRY / EXIT: This feature automatically moves the driver’s
seat rearward and adjusts the steering wheel for easy exit/entry from
the vehicle.
116 Information Displays
2013 F-150 (f12)
Owners Guide gf, 3rd Printing, February 2013
USA (fus)