beautypg.com

Warning lamps and indicators, Instrument cluster – FORD 2013 Escape v.3 User Manual

Page 85

background image

1

2

3

4

5

6

7 8 9 1011

12

13

14

15

E142800

Odometer

Located in the bottom of the information
display, it registers the accumulated
distance your vehicle has traveled.

Outside Air Temperature

Shows the outside air temperature.

Trip Computer

See Trip Computer (page 88).

Vehicle Settings and Personalization

See General Information (page 86).

Engine Coolant Temperature
Gauge

WARNING

Never remove the coolant reservoir
cap while the engine is running or hot.

At normal operating temperature, the
needle will remain in the center section.

Note: Do not restart the engine until the
cause of overheating has been resolved.

If the needle enters the red section, the
engine is overheating. Stop the engine,
switch the ignition off and determine the
cause once the engine has cooled down.
See Engine Coolant Check (page 227).

Fuel Gauge

Switch the ignition on. The fuel gauge will
indicate approximately how much fuel is
left in the fuel tank. The fuel gauge may
vary slightly when your vehicle is moving
or on a gradient. The arrow adjacent to the
fuel pump symbol indicates on which side
of the vehicle the fuel filler door is located.

A low fuel reminder will be triggered when
the fuel gauge needle is at 1/16th or
vehicles equipped with a DTE (Drive To
Empty) is at 35 miles (60km), whichever
occurs first.

WARNING LAMPS AND
INDICATORS

The following warning lamps and
indicators will alert you to a vehicle
condition that may become serious. Some
lamps will illuminate when you start your
vehicle to make sure they work. If any
lamps remain on after starting your vehicle,
refer to the respective system warning
lamp for further information.

Note: Some warning indicators appear in
the information display and function the
same as a warning lamp but do not display
when you start your vehicle.

Airbag - Front

If it fails to illuminate when you
start your vehicle, continues to
flash or remains on, it indicates

a malfunction. Have the system checked
by your authorized dealer.

82

Instrument Cluster