FORD 2013 Escape v.3 - Manual (Page 345)

1. Press AM or FM > Options > TAG
Button > On.
2. When you hear a song you like, touch
TAG.
3. The system automatically saves the
song's information and transfers it to
your portable music player (if
supported) when you connect it to the
system. The system automatically
transfers the tag to your player (if
already connected) and a pop-up
confirms the transfer.
4. When you access iTunes® with your
portable music player, the tags appear
to you as a reminder. The system
allows you to tag up to approximately
100 songs. For a list of devices that
support tagging, see
www.SYNCMyRide.com,
www.SYNCMyRide.ca or
www.syncmaroute.ca.
When HD Radio broadcasts are active, you
can access the following functions:
You Can When You Select
Hear a brief sampling of all available stations. Scan
This feature still works when HD Radio reception is on,
although it does not scan for HD2-HD7 channels. You may
see the HD logo appear if the station has a digital broad-
cast.
When the channel is active on-screen, press and hold a
memory preset slot until the sound returns. There is a brief
mute while the radio saves the station. Sound returns
when finished. When recalling a HD2 or HD3 memory
preset, there is a mute before the digital audio plays, as
the system must once again acquire the digital signal. As
with any saved radio station, you cannot access the saved
station if your vehicle is outside the station's reception
area. To save a multicast station
as a preset
342
MyFord Touch™
(If Equipped)