FORD 2014 Taurus v.1 - Manual (Page 149)

MEMORY FUNCTION (if equipped)
The memory control, located on the side seat panel, allows positioning
recall of the:
• driver seat.
• power mirrors.
• adjustable pedals (if equipped).
• power tilt/telescopic steering column (if equipped).
A. Type 1
B. Type 2
Programming a memory position
Note: A memory position may be programmed at any time.
• To program a position, move the memory features to the desired
positions using the associated controls. Press and hold the desired
memory button for at least two seconds. A chime will sound
confirming that a memory position has been set.
• To program another position, repeat the previous procedure using the
other buttons.
Recalling a memory position
A programmed memory position can be recalled:
• in any gearshift position if the ignition is not on.
• only in position P or N if the ignition is on.
Press the desired memory control to recall a memory position.
A B
148 Seats
2014 Taurus
Owners Guide gf, 1st Printing, April 2013
USA (fus)