beautypg.com

Removing the jumper cables, Roadside emergencies 251 – FORD 2014 Expedition v.1 User Manual

Page 252

background image

Removing the Jumper Cables

Note: In the illustration, the vehicle on the bottom is used to designate
the assisting (boosting) battery.

Remove the jumper cables in the reverse order that they were
connected.

1. Remove the jumper cable from
the ground metal surface.

2. Remove the jumper cable on the
negative (-) terminal of the booster
vehicle’s battery.

3. Remove the jumper cable from
the positive (+) terminal of the
booster vehicle’s battery.

4. Remove the jumper cable from
the positive (+) terminal of the
disabled vehicle’s battery.

After the disabled vehicle has been started and the jumper cables
removed, allow it to idle for several minutes so the engine computer can
relearn its idle conditions.

4

1

3

2

Roadside Emergencies

251

2014 Expedition (exd)
Owners Guide gf, 1st Printing, June 2013
USA
(fus)