Seats 135 – FORD 2014 Expedition v.1 User Manual
Page 136
Adjusting the Head Restraint
Raise: Pull up the head restraint.
Lower:
1. Press and hold button C.
2. Push down on the head restraint.
Remove:
1. Pull up the head restraint until it reaches the highest adjustment
position.
2. Press and hold buttons C and D.
3. Pull up the head restraint.
Reinstall Align the steel stems into the guide sleeves and push the head
restraint down until it locks.
Second row outboard seat head restraints – The outboard head
restraints are non-adjustable, but you can fold them.
The non-adjustable head restraints
consist of:
• a trimmed energy absorbing foam
and structure (A),
• and a fold strap (B).
1. Pull the fold strap to fold the outboard head restraint.
2. Pull up on the head restraint to place the head restraint back to the
upright position.
Second row center seat head restraint – The center rear head
restraint is fixed and non-adjustable. The head restraint consists of a
trimmed foam covering over the upper structure of the seat back.
A
B
Seats
135
2014 Expedition (exd)
Owners Guide gf, 1st Printing, June 2013
USA (fus)