BMW 745i Sedan 2005 - Manual (Page 57)

Cont
ro
ls
55
Refe
re
n
c
e
A
t a gl
anc
e
Dr
iv
in
g t
ip
s
Co
mm
uni
c
a
ti
o
n
s
Na
viga
ti
on
Ent
e
rt
a
inm
e
n
t
Mo
b
il
it
y
Hold refer to Automatic Hold on
page
65 .
You can select the displayed function using
the button on the steering wheel.
If you have activated the Automatic
Hold feature, refer to page
65 , you
can use the button on the steering wheel to
deactivate the system for parking maneu-
vers etc.
<
Seat, mirror and steering
wheel memory
You can store and select two different
adjustment settings for the driver's seat,
exterior mirrors and steering wheel.
If your vehicle is equipped with comfort
seats, you can also store and set two sitting
positions for each additional seat with the
memory.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1. Radio mode, or switch on ignition
2. Set desired sitting position; for driver's
seat also the exterior mirror and steer-
ing wheel position
3. Press M EMORY button:
The indicator lamp within the button
comes on
4. Press the desired memory button 1 or 2:
The indicator lamp goes out.
Selecting a stored setting
Convenience mode
1. Driver's door open after unlocking or
ignition lock in radio mode
2. Briefly press the desired memory but-
ton 1 or 2.
The system immediately cancels the
adjustment procedure when you press one
of the seat adjustment buttons or use one
of the memory buttons.
Safety feature
1. Driver's door closed and ignition
switched either on or off
2. Press memory button 1 or 2 and main-
tain pressure until the adjustment pro-
cess has been completed.
If you press the M EMORY button acciden-
tally:
Press the button again; the indicator lamp
goes out.
Do not call up a position from the
memory while the vehicle is moving.
There is a risk of accident from unexpected
movement of the seat or steering wheel.
<
You can have your vehicle pro-
grammed to automatically dial in your
own individual adjustment settings for the
seat, mirrors and steering wheel whenever
you use your personal remote control to
unlock the vehicle.
<
When using the Key Memory feature
always make sure that the footwell
behind the driver's seat is empty and unob-
structed. If you fail to do so, any persons or
objects behind the seat could be injured or
damaged by a rearward movement of the
seat.
<
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG