Displaying vehicle data, Teleservice, bmw assist – BMW 330Ci Coupe 2006 User Manual
Page 180
TeleService, BMW Assist
178
5.
Select "Service Status" and press the con-
troller.
The current services available from
TeleService or BMW Assist are displayed.
6.
If applicable, select "Options" and press the
controller.
7.
Select "Update services" and press the
controller.
Terminating services*
When you terminate services, the connection to
BMW Assist is deactivated.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Communication settings" and
press the controller.
4.
Select "BMW Service settings" and press
the controller.
5.
Select "Service Status" and press the con-
troller.
6.
Select "Options" and press the controller.
7.
Select "Terminate services" and press the
controller.
TeleService or BMW Assist is blocked from
use, and your vehicle's current position will not
be transmitted during an emergency call
*
. To
cancel the service block, the system must be
reactivated, refer to page
. Your contractual
agreement is not affected by this.
Enable TeleService and, if applicable, BMW
Assist once again to log on again.
Displaying vehicle data
When TeleService or BMW Assist is activated,
the license plate and the vehicle identification
number of your vehicle can be displayed.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Communication settings" and
press the controller.
4.
Select "BMW Service settings" and press
the controller.
5.
Select "Profile" and press the controller.
To change the license plate number, please
contact your BMW center.
ba8_E9293_US.book Seite 178 Freitag, 5. Mai 2006 1:02 13
Online Edition for Part no. 01 41 0 012 346 - © 05/06 BMW AG