The brightness of the display is adapted to the
ambient lighting conditions. However, you can
change the base setting.
With the low beams switched on, the brightness
can also be adjusted with the knurled wheel of
the instrument lighting.
iDrive, for operating principle refer to page

Press the

button.

This opens the start menu.

Press the controller to open the menu.

Select "Settings" and press the controller.

Select "Display settings" and press the
controller.

Change to upper field if necessary. Turn the
controller until "Head-Up Display" is
selected and press the controller.

Change into the second field from the top.
Turn the controller until "Brightness" is
selected and press the controller.

Turn the controller until the desired setting
is selected.

The setting is stored for the remote control cur-
rently in use.

Notes

The visibility of the displays in the Head-Up Dis-
play is influenced by:

Sunglasses with certain polarization filters

Certain seating positions

Objects on the cover of the Head-Up Dis-
play

Wet road surface and unfavorable lighting
conditions

If the image is distorted, please have the base
setting checked at a BMW center.

Special windshield

The windshield is part of the system. The shape
of the windshield complies with the require-
ments of the Head-Up Display to enable a pre-
cise display. A film in the windshield prevents
double images from being displayed.
Windshield replacement should be carried out
by a BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.

This manual is related to the following products:

M6 Coupe 2009