BMW X6 xDrive50i 2009 - Manual (Page 80)

Everything under control
78
Everything under control
Odometer, outside
temperature display, clock
1 Knob in the instrument panel
2 Time, outside temperature, and date
3 Odometer and trip odometer
Knob in the instrument panel
> With ignition switched on
Press knob:
Resetting trip odometer
Press the knob for approx. 5 seconds:
Displaying service requirements, refer to
page
82
> With ignition switched off
Press knob:
Briefly displaying time, outside temperature
and odometer
Units of measure
To select the respective units of measure, miles
or km for the odometer as well as
7 or 6 for
the outside temperature, refer to page 89 .
The setting is stored for the remote control cur-
rently in use.
Time, date, outside temperature
From radio readiness the outside temperature
and the time are displayed.
Setting the time, refer to page
88 .
Retrieving date
Press the button on turn signal lever upward;
the date appears.
To set the date, refer to page
89 .
Pressing the button upward or downward sev-
eral times changes the display between clock,
outside temperature, date, and Check Control
messages, refer to page
86 .
Outside temperature warning
If the display drops to +37 7/+36, a signal
sounds and a warning lamp lights up. A mes-
sage appears on the Control Display. There is
an increased danger of ice.
Even at temperatures above +37 7/
+3 6 ice can form. Therefore, drive care-
fully, e.g. on bridges and sections of road in the
shade, otherwise there is an increased accident
risk.
<
Odometer and trip odometer
Resetting trip odometer:
Press knob
1 in the instrument panel with the
ignition switched on.
When vehicle is parked
To briefly display the time, outside temperature
and mileage after the remote control has been
removed from the ignition lock:
Press knob
1 in the instrument panel.
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG