BMW X6 xDrive50i 2009 - Manual (Page 276)

Replacing components
274
shop that works according to BMW repair
procedures with correspondingly trained
personnel.
Arrangement of tail lamps
1 Brake force display/rear lamps
2 Brake lamp/rear lamp
3 Backup lamp
4 Turn signal
Brake lamp
1. Open the side panel in the cargo bay.
2. Remove the first-aid kit * and warning trian-
gle * if necessary.
3. Rotate the relevant bulb socket to the left
and remove.
4. Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
5. Install in the reverse order.
Turn signal
1. Open the side panel in the cargo bay.
2. Remove the first-aid kit * and warning trian-
gle * if necessary.
3. Remove bulb holder along with bulb and
replace.
4. Install in the reverse order.
Backup lamp
1. Open the side panel in the cargo bay.
2. Remove the first-aid kit * and warning trian-
gle * if necessary.
3. Remove bulb holder along with bulb and
replace.
4. Install in the reverse order.
Brake force display
1. Carefully remove the cover in the liftgate
panel with a screwdriver.
2. Rotate the bulb socket to the left and
remove.
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG