The comfort access function may malfunction
due to local radio waves. Then open or close the
vehicle with the buttons on the remote control
or with a key. To start the engine following this,
insert the remote control in the ignition lock.

The warning lamp in the instrument
panel lights up when an attempt is
made to start the engine: starting the

engine is not possible. The remote control is
not in the vehicle or has a malfunction. Take
along the remote control into the vehicle or
have it checked. Insert another remote control
into the ignition lock if necessary.

The warning lamp in the instrument
panel lights up when the engine is
running: the remote control is no

longer in the vehicle. After switching off the
engine, the engine can only be started again
within approx. 10 seconds if no door has been
opened.

The indicator lamp in the instrument
panel lights up and a message
appears on the Control Display:

Replace the battery of the remote control.

Replacing battery

The remote control for comfort access contains
a battery which must be replaced if necessary.

Remove integrated key from remote con-
trol, refer to page

Remove cover.

Lay in new battery with positive side facing
upward.

Press cover closed.

Dispose of used batteries at a collection
point or at your BMW Sports Activity

Vehicle Center.

Windows

To prevent injuries, exercise care when
closing the windows and keep them in

your field of vision until they are shut.
Always take along the remote control when you
leave the vehicle, otherwise children could, for
example, operate the windows and injure them-
selves.

Opening, closing

Press switch to resistance point:
The window continues to open as long as
you keep the switch pressed.

Press switch beyond resistance point:
The window opens automatically. Pressing
the switch again stops the opening move-
ment.

You can close the windows in the same manner
by pulling the switch.

This manual is related to the following products:

X6 xDrive35i 2009