Turn signals/headlamp flasher/high beams, Turn signals, Flasher – BMW X5 xDrive35d 2009 User Manual
Page 75
73
Locking
1.
Pull out the releasing tool.
The transmission lock is engaged again.
2.
If necessary, insert the lock
*
and lock it.
3.
Close the cover in the bottom of the cup
holder and lay in the mat again.
4.
Close the cover of the cup holder and stow
the releasing tool.
Information on jump starting and towing, from
page
.
Turn signals/headlamp
flasher/high beams
1 High beams
2 Headlamp flasher
3 Turn signals
Using turn signals
Press the lever beyond the resistance point.
To switch off manually, press the lever up to the
resistance point.
Atypically rapid flashing of the indicator
lamp indicates that a turn signal bulb
needs to be replaced.
<
Signaling briefly
Press lever to resistance point and hold for as
long as you wish to signal.
Triple turn signal activation
Press the lever up to the resistance point. The
turn signal flashes three times.
You can activate or deactivate this function.
iDrive, for operating principle refer to page
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
5.
Change to upper field if necessary. Turn the
controller until "Lighting" is selected and
press the controller.
6.
Select "Triple turn signal" and press the
controller.
Triple turn signaling is activated.
The setting is stored for the remote control cur-
rently in use.
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG