Commissioning – BMW X5 xDrive35d 2009 User Manual
Page 223
221
It may not be possible to establish a telephone
connection using the mobile phone while a con-
nection is being established to BMW Assist or
while a call to BMW Assist is already in
progress. If this happens, you must log off the
mobile phone from the vehicle if you wish to
place a call with the mobile phone.
Commissioning
Pairing mobile phone in vehicle
The following prerequisites must be met:
>
Suitable mobile phone: the mobile phone is
supported by the full mobile phone prepara-
tion package. Information on this subject is
also provided on the Internet at:
www.bmw.com
>
The mobile phone is ready to operate.
>
The Bluetooth link on the vehicle, refer to
page
, and on the mobile phone is
active.
>
Depending on the mobile phone, it may be
necessary to adjust the presets of the
mobile phone, e.g. via the following menu
items:
>
Bluetooth activated
>
Connection not with confirmation
>
Reconnect
>
Depending on the mobile phone model, the
setting energy saving mode can, for exam-
ple, result in vehicle failing to detect the
paired mobile phone.
>
For pairing, specify any desired number as
the Bluetooth passkey, e.g. 1. This Blue-
tooth passkey is no longer required follow-
ing successful pairing.
>
The ignition is switched on.
Only pair the mobile phone with the vehi-
cle stationary, otherwise the passengers
and other road users can be endangered due to
a lack of attentiveness on the part of the
driver.
<
Switching on ignition
1.
Insert the remote control as far as possible
into the ignition lock.
2.
Switch on the ignition by pressing the Start/
Stop button without depressing the brake
pedal.
Preparation via iDrive
iDrive, for operating principle refer to page
3.
Press the
button to open the start
menu.
4.
Press the controller to open the menu.
5.
Select "Settings" and press the controller.
6.
Select "Bluetooth" and press the controller.
Online Edition for Part no. 01 41 2 600 792 - © 09/08 BMW AG