BMW 650i Convertible 2009 User Manual
Page 87
85
3.
Turn the controller until "Time" is selected
and press the controller.
4.
Turn the controller until "Set time" is
selected and press the controller.
Making settings
1.
Turn the controller to set the hours and
press the controller.
2.
Turn the controller to set the minutes and
press the controller.
The changed time is stored.
Switching on hour signal*
You will hear three tones just before the top of
each hour.
Select "Hour memo" and press the controller.
The hour signal is activated.
The setting is stored for the remote control cur-
rently in use.
Setting 12h/24h format
1.
Select "Time format" and press the control-
ler.
2.
Select the desired format and press the
controller.
The setting is stored for the remote control cur-
rently in use.
Setting date
1.
Select "Date" and press the controller.
2.
Select "Set date" and press the controller.
The first setting of the date display is
selected.
3.
Turn the controller to make the adjustment.
4.
Press the controller to apply the setting.
The next setting is selected.
5.
Make the remaining adjustments. After the
last adjustment, the date is stored.
Setting date format
1.
Select "Date format" and press the control-
ler.
2.
Select the desired format and press the
controller.
The setting is stored for the remote control cur-
rently in use.
Brightness of Control Display
The brightness is automatically adapted to the
ambient lighting conditions. However, you can
change the basic setting.
iDrive, for operating principle refer to page
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Display settings" and press the
controller.
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG