Turn signals/ headlamp flasher, Turn signals – BMW 650i Convertible 2009 User Manual
Page 67
65
Releasing
1.
Unclip the sleeve of the selector lever.
2.
Pull the sleeve over the selector lever.
3.
Reach into the trim-piece opening, arrow
1,
and firmly pull the trim piece upward,
arrow
2.
4.
Remove cover over the opening, refer to 5.
5.
Insert a screwdriver from the onboard tool
kit, refer to page
, into the opening,
arrow
1.
6.
Pull the screwdriver toward the rear until it is
heard to engage, arrow
2, and leave it
inserted in the opening. The transmission
lock is released.
Locking
1.
Pull out the screwdriver upward.
The transmission lock is locked again.
2.
Reinstall the cover and the trim piece.
Information on jump starting and towing from
page
Turn signals/
headlamp flasher
1 High beams
2 Headlamp flasher
3 Turn signals
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.
Atypically rapid flashing of the indicator
lamp indicates the failure of a turn signal
lamp.
<
Signaling briefly
Press lever to resistance point and hold for as
long as you wish to signal.
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG