BMW 650i Convertible 2009 - Manual (Page 84)

Everything under control
82
To exit the displayed information:
Select the
arrow and press the controller.
Hiding Check Control messages
Press the CHECK button on turn signal lever.
Some Check Control messages are displayed
until the malfunctions have been rectified. They
cannot be hidden. If a number of malfunctions
occur simultaneously, they are displayed in
succession.
Other messages are hidden after approx.
20 seconds, but remain stored.
Displaying stored Check Control
messages
1. Press the button longer:
The first stored message is displayed.
2. Press the button:
When the button is pressed again, a differ-
ent message is displayed.
Displaying supplementary information
iDrive, for operating principle refer to page 16 .
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Turn the controller until "Info sources" is
selected and press the controller.
4. Turn the controller until "Service Info" is
selected and press the controller.
5. Change to upper field if necessary. Turn the
controller until "Check Control messages"
is selected and press the controller.
6. Select a message and press the controller.
To exit from the menu immediately:
Select the
arrow and press the controller.
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG