BMW 335i Convertible 2009 - Manual (Page 74)

Everything under control
72
Resetting the Trip computer
1. "Vehicle Info"
2. "Trip computer"
3. Select
> "Reset" all values are reset
> "Automatically reset" all values are reset
approx. 4 hours after the engine is
switched off
Settings and information
Operating principle
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 70
3 When the lights are on: instrument lighting
brightness 95
4 Calling up Check Control 77
5 Checking engine oil level 207
6 Setting the time 75
7 Setting the date 76
8 Viewing service requirement display 73
Exiting displays
The outside-temperature reading and the time
reappear when you press button
2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
Setting the units of measure
You can change the units for fuel consumption,
route/distance, temperature and pressure.
iDrive, for operating principle refer to page
16 .
Online Edition for Part no. 01 41 2 600 967 - © 09/08 BMW AG