BMW M6 Convertible 2010 - Manual (Page 99)

Co
n
tr
o
ls
97
Re
fe
re
n
c
e
At
a
g
la
n
c
e
D
riv
in
g ti
ps
C
o
m
m
uni
ca
ti
o
n
s
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
M
o
bi
lity
ity inside the vehicle deteriorates continu-
ously.
<
Residual heat
The heat stored in the engine is
used to heat the passenger com-
partment, e.g. while stopped at a
school to pick up a child.
1. Switch off the engine.
2. Turn to the right, refer to arrow.
The function can be switched on when the fol-
lowing conditions are met:
> up to 15 minutes after switching off the
engine
> with engine at operating temperature
> with sufficient battery voltage
> at an outside temperature below 77 7/
25 6
From radio readiness the interior temperature,
the air volume and the air distribution can be
set.
Switching automatic climate control on
and off
1. Turn to the left to minimum air volume.
2. After approx. 1 second, turn to the left
again.
You switch on the system again by pressing any
button of the automatic climate control.
Ventilation
1 Thumbwheels to smoothly open and close
vent outlets
2 Levers to change the vent outlet direction
Do not drop any foreign objects into the
vent outlets; otherwise, they could be cat-
apulted outwards and cause injuries. <
Ventilation for cooling
Adjust the vent outlets to direct the flow of cool
air in your direction, for instance, if the interior
has become too warm, etc.
Draft-free ventilation
Set the vent outlets so that the air flows past
you and is not directed straight at you.
Adjusting temperature in upper body
region
You can adjust the temperature in the upper
body region with iDrive.
iDrive, for operating principle refer to page
16 .
1. Press the button.
This opens the start menu.
2. "Settings"
3. "Climate"
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG