Driving stability control systems – BMW M6 Convertible 2010 User Manual

Page 78

nolo

r co

mfort

, c

nve

e an

signal tone sounds. The display appears on the
Control Display as soon as PDC is activated.

System limits

Even with PDC, final responsibility for
estimating the distance between the

vehicle and any obstacles always remains with
the driver. Even when sensors are provided,
there is a blind spot in which objects can no
longer be detected. The system is also subject
to the physical limits that apply to all forms of
ultrasonic measurement, such as those
encountered with tow bars and trailer cou-
plings, or thin and wedge-shaped objects etc.
Low objects already displayed, e.g. curbs, can
also disappear from the detection area of the
sensors again before or after a continuous tone
already sounds. Higher, protruding objects, e.g.
ledges, cannot be detected. For this reason,
drive with care; otherwise, there is a danger of
personal injury or property damage.
Loud sources of sound, inside and outside the
vehicle, could drown out the PDC signal tone.

Driving stability control

systems

Your BMW is equipped with an extended array
of systems designed to enhance and maintain
vehicle stability under extreme conditions.

Antilock Brake System ABS

ABS prevents locking of the wheels during
braking. Safe steering response is maintained
even during full braking. Active safety is thus
increased.
The ABS is operational every time you start the
engine. For information on safe braking, refer to
page

109

CBC Cornering Brake Control

When braking during curves or when braking
during a lane change, driving stability and steer-
ing response are improved further.

Electronic brake-force distribution

The system controls the brake pressure in the
rear wheels to ensure stable braking behavior.

Brake assistant

When you apply the brakes rapidly, this system
produces maximum braking force boosting and
thus helps to achieve the shortest possible
braking distance during full braking maneuvers.
This system exploits all of the benefits provided
by ABS.
Do not reduce the pressure on the brake pedal
for the duration of the full braking.

DSC Dynamic Stability Control

DSC optimizes vehicle stability and traction. It
also detects unstable driving states such as
understeering and oversteering, and helps
keep the vehicle on course within the physical
limits by reducing the engine output and by
braking at the wheels.
The DSC is operational every time you start the
engine.

The laws of physics cannot be repealed,
even with DSC. An appropriate driving

style always remains the responsibility of the
driver. Therefore, do not reduce the additional
safety margin further by taking risks.

Indicator lamp

The indicator lamp goes out shortly
after the engine is started.
The indicator lamp flashes: DSC con-

trols the drive forces and brake forces.
The indicator lamp stays lit: DSC is deactivated.

M Dynamic Mode MDM

The M Dynamic Mode is a mode of the DSC
Dynamic Stability Control. It enables driving
with greater longitudinal and lateral accelera-
tion on dry road surfaces, however with limited
vehicle stability. The system does not provide
stabilizing intervention by reducing the engine
output and braking at the wheels until the abso-
lute driving limit is reached. Steering correc-
tions by the driver may also be required in this
driving state.

This manual is related to the following products:

M6 Coupe 2010