Speed limit, Co n tr o ls o ve rvi ew – BMW M6 Convertible 2010 User Manual
Page 74
Co
n
tr
o
ls
O
ve
rvi
ew
72
Displaying stored Check Control
messages
1.
Press the button longer:
The first stored message is displayed.
2.
Press the button:
When the button is pressed again, a differ-
ent message is displayed.
Via iDrive
iDrive, for operating principle refer to page
.
1.
"Vehicle Info"
2.
"Vehicle status"
3.
"Check Control"
4.
Select the text message.
Speed limit
You can enter a speed and a Check Control
message indicates when you have reached this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
Displaying, setting or changing limit
iDrive, for operating principle refer to page
1.
"Settings"
2.
"Limit"
3.
"Limit:"
4.
Turn the controller until the desired limit is
displayed.
5.
Press the controller.
The speed limit is stored.
Applying your current speed as limit
iDrive, for operating principle refer to page
1.
"Settings"
2.
"Limit"
3.
"Select current speed"
4.
Press the controller.
The system adopts your current speed as the
limit.
Activating/deactivating limit
iDrive, for operating principle refer to page
1.
"Settings"
2.
"Limit"
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG