Driving – BMW 650i Convertible 2010 User Manual
Page 68
Driving
66
One lever for all functions
1 Storing and increasing desired speed
2 Storing and reducing desired speed
3 Interrupting, refer to page
67
, or deactivat-
ing system, refer to page
67
4 Activating stored desired speed and dis-
tance, refer to page
67
, or driving off, refer
to While stopped, page
67
5 Selecting distance to vehicle driving ahead,
refer to page
Storing current speed
Tap the lever, arrow
1, or briefly pull it, arrow 2.
The system stores the current vehicle speed. It
is indicated on the speedometer and briefly in
the instrument cluster.
Increasing desired speed
Press or tap the lever to the resistance point or
beyond, arrow
1, until the desired speed is dis-
played.
The speed then displayed is stored and
achieved on a clear road.
>
Each time the lever is tapped to the resis-
tance point, the desired speed is increased
by approx. 1 mph/1 km/h.
>
Each time the lever is tapped beyond the
resistance point, the desired speed
increases to the next fives position in the
mph speedometer display or the next tens
position in the km/h speedometer display.
Reducing desired speed
Pull the lever, arrow
2, until the desired speed is
displayed.
These functions are operated in the same man-
ner as increasing your desired speed.
Selecting distance
>
Briefly press rocker switch downward:
Increase distance.
>
Briefly press rocker switch upward:
Reduce distance.
The selected distance is displayed in the instru-
ment cluster.
Distance 1
Distance 2
Distance 3
Distance 4
This distance is set when you acti-
vate the system.
Online Edition for Part no. 01 41 2 602 716 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 716 - © 08/09 BMW AG