BMW 650i Convertible 2010 User Manual

Page 61

The transmission mode and the currently
selected gear are displayed.

Engaging transmission position

Do not leave the transmission position P
until the engine is running: interlock.

With the vehicle stationary, depress the
brake pedal before shifting out of P or N;
otherwise the shift command will not be
executed: shiftlock.

To prevent the vehicle from creeping
after you select a driving position,

maintain pressure on the brake pedal until
you are ready to start.

Engaging N, D, R

Briefly press the selector lever in the desired
direction, beyond a resistance point if neces-
sary. Press button

1 simultaneously out of P or

into R.
The engaged transmission position is also dis-
played on the selector lever.
The selector lever immediately returns to the
center position when released.

Engaging P

Press button

R Reverse

Select only when the vehicle is stationary.

P Park

Select only when the vehicle is stationary. The
rear wheels are locked.

P is engaged as soon as you switch off the
engine unless N is engaged and with

Comfort Access, the remote control is inserted
in the ignition lock, refer to Before driving into a
car wash, page

N Neutral

Can, for example, be engaged in automatic car
washes. The vehicle can roll.

N remains engaged even after the engine
is switched off whenever you leave the

remote control in the ignition lock. This function
is useful, for example, in automatic car washes,
refer to page

D Drive, automatic position

Position for normal vehicle operation. All for-
ward gears are available.

Kickdown

Kickdown enables you to achieve maximum
performance.
Press the accelerator pedal beyond the
increased resistance at full throttle.

Sport program and manual mode M/S

Press selector lever toward the left from trans-
mission position D:
The sport program is activated and S1 through
S6 is displayed in the instrument cluster. This

This manual is related to the following products:

650i Coupe 2010