BMW 550i xDrive Gran Turismo 2010 User Manual
Page 63
3.
Pull the seat cover forward.
Before mounting the LATCH child restraint fix‐
ing system, pull the belt away from the child re‐
straint fixing system.
Mounting LATCH child restraint fixing
systems without power rear seats
1.
Move the seat to its rearmost position.
2.
For better accessibility, tilt the backrest
back slightly.
3.
Fold the leather cover on the seat forward.
4.
Mount the child restraint fixing system; refer
to the operating instructions of the system.
5.
Make sure that both lower LATCH anchors
have properly engaged and that the child re‐
straint fixing system is resting snugly
against the backrest.
6.
After mounting the system, move the back‐
rest back up slightly so that the child re‐
straint fixing system rests against the back‐
rest.
Mounting LATCH child restraint fixing
systems on power rear seats*
1.
Before mounting, adjust the seats to their
basic position, refer to page 53
2.
Mount the child restraint fixing system; refer
to the operating instructions of the system.
3.
Ensure that both LATCH anchors are prop‐
erly connected.
Child restraint fixing systems with a
tether strap
Mounting points
Depending on the vehicle equipment, there are
two outer or three mounting points for child re‐
straint fixing systems with a tether strap.
Fold up the middle mounting point.
LATCH mounting eyes
Only use the mounting eyes for the upper
LATCH retaining strap to secure child restraint
fixing systems; otherwise, the mounting eyes
could be damaged.◀
Retaining strap guide
Retaining strap
Make sure the upper retaining strap does
not run over sharp edges and is not twisted as it
passes to the top anchor. Otherwise, the strap
will not properly secure the child restraint fixing
system in the event of an accident.◀
1 Direction of travel
2 Head restraint.
3 Hook for upper retaining strap
4 Mounting point/eye
Seite 63
63
Online Edition for Part no. 01 41 2 604 413 - 03 10 500