Pdc park distance control, Trol – BMW 650i xDrive Convertible 2012 User Manual

Page 107

Change, maintain speed

The rocker switch can be pressed while inter‐
rupted to maintain and store the current speed.

Adapting the desired speed
Adapt the desired speed to the road con‐

ditions and be ready to brake at all times; other‐
wise, there is the danger of an accident occur‐
ring.◀

Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed if the road is
clear.

▷

Each time the rocker switch is pressed to the
point of resistance, the desired speed in‐
creases or decreases by approx. 1 mph/
1 km/h.

▷

Each time the rocker switch is pressed past
the point of resistance, the desired speed
increases or decreases by a maximum of
5 mph/10 km/h.

▷

Pressing the rocker switch to the resistance
point and holding it accelerates or deceler‐
ates the vehicle without requiring pressure
on the accelerator. After the rocker switch is
released, the vehicle maintains its final
speed. Pressing the switch beyond the re‐
sistance point causes the vehicle to accel‐
erate more rapidly.

Resuming the desired speed

Press the button.

The stored speed is reached and maintained.

Displays in the instrument cluster

1 Display of desired speed
2 Indicator lamp
3 Brief status display

Desired speed

Display in the speedometer:

▷

The marking lights up in
green: the system is active.

▷

The marking lights up in or‐
ange: the system has been
interrupted.

▷