BMW 335i xDrive Sedan 2014 User Manual
Page 121
The displays go out. The stored desired speed
and distance are deleted.
Interrupting
When active, press the button.
If interrupting the system while stationary,
press on the brake pedal at the same time.
The system is automatically interrupted in the
following situations:
▷
When the brakes are applied.
▷
When drive mode D is removed.
▷
When DTC Dynamic Traction Control is
activated or DSC is deactivated.
▷
When DSC is actively controlling stability.
▷
When SPORT+ is activated with Driving
Dynamics Control.
▷
If the safety belt and the driver's door are
opened when the vehicle is standing still.
▷
If the system has not detected objects for
an extended period, e.g., on a road with
very little traffic without road edge line
markings.
▷
If the detection range of the radar is dis‐
rupted, for example, by dirt or heavy fog.
Maintaining/storing the speed
Press the button.
Or:
Press the rocker switch while the system is in‐
terrupted.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
This is displayed, refer to page
speedometer and briefly in the instrument
cluster.
When cruise control is maintained or stored,
DSC Dynamic Stability Control is switched on,
if necessary.
Changing, maintaining, and storing
the speed
The rocker switch can be pressed while the
system is interrupted to maintain and store the
current speed. DSC Dynamic Stability Control
is switched on, if necessary.
Adapting the desired speed
Adapt the desired speed to the road con‐
ditions and be ready to brake at all times; oth‐
erwise, there is the danger of an accident oc‐
curring.◀
Speed differences
Large differences in speed relative to ve‐
hicles ahead of the vehicle cannot be compen‐
sated by the system for example in the follow‐
ing situations:
▷
When quickly approaching a slowly moving
vehicle.
▷
When another vehicle suddenly swerves
into the wrong lane.◀
Press the rocker switch up or down repeatedly
until the desired speed is set.
Seite 121
Driving comfort
Controls
121
Online Edition for Part no. 01 40 2 925 743 - II/14