Freedom Designs TriPod LT - Manual (Page 28)

FREEDOM DESIGNS, INC. ● 2241 Madera Rd. Simi Valley, CA. 93065 ● 800-331-8551 ● Fax 888-582-1509
www.freedomdesigns.com
26
Main Frame - Wheel Locks
The TriPod ™
LT comes standard with push or
pull to lock wheel locks or hub locks.
Push or Pull to Lock Wheel Locks
To lock wheels in place:
1. Grasp the lever of the wheel lock with
your
hand.
2. Push lever forward (push to lock) or pull
lever back (pull to lock) to engage the
wheel lock. Reverse procedure to release
the lock.
Caution: Always set the wheel locks when
entering or leaving the wheelchair. Wheel
locks are not designed to slow the
wheelchair down when it is moving. Wheel
locks hold the wheelchair in place when it
is at a complete stop.
Wheel lock Options
The TriPod
™
LT also offers the option of
wheel lock extensions.
Hub Lock
The TriPod
™ LT also offers the hub lock at no
additional charge. The hub lock is attached to
the axle mount plate as shown. The Hub Lock
lever may be mounted to the frame or the back
cane.
Hub Locks*
1. To lock the wheels, push the Hub Lock
lever. This will lock the wheels in place.
2. To unlock the wheel, pull the Hub Lock
lever. This will unlock the wheels and a l
low them to roll.
*Patented