Crestron electronic QM-MD5x1 - Manual (Page 55)

Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer
QM-MD5x1, Slot 5 Analog Input Signal Descriptions
INPUT DESCRIPTION
CompToSave [This signal is operative only if Auto
Compensation is NOT enabled.]
Sets the source gain compensation that will be
saved to the preset given by the analog signal
CompPreset#ToSave when the digital signal
SaveCompPreset is held high.
Valid analog values range from -100d (-10 dB) to
+100d (+10 dB), adjustable in increments of 0.1
dB. Changing the analog value by 1d signifies a
boost or attenuation of 0.1 decibels.
A trim of 0d (0 dB) means that the signal will
pass unaffected.
CompPreset#ToSave [This signal is operative only if Auto
Compensation is NOT enabled.]
Sets the preset number where the source gain
compensation given by the analog signal
CompToSave will be saved.
Valid values range from 1d to 254d. Out-of range
values are ignored.
AudioOutSpVolume Adjusts the volume level of the SP channel of
AUDIO OUT.
Valid values range from 0% (-80 dB) to 100%
(+20 dB).
AudioOutSpBass and
AudioOutSpTreble Adjusts the treble and bass levels of the SP
channel of AUDIO OUT.
Valid values range from 0% (-15 dB) to 100%
(+15 dB). A value of 50% signifies a flat level
corresponding to 0 dB.
AudioOutSpDelay Sets the speech delay, in milliseconds, on the SP
channel of AUDIO OUT.
Valid analog values range from 0d (0ms) to 40d
(40ms).
AudioOutLVolume Adjusts the volume level of the PRG L channel of
AUDIO OUT.
Valid values range from 0% (-80 dB) to 100%
(+20 dB).
AudioOutRVolume Adjusts the volume level of the PRG R channel
of AUDIO OUT.
Valid values range from 0% (-80 dB) to 100%
(+20 dB).
AudioOutPrgComp [This signal is operative only if Auto
Compensation is NOT enabled.]
Adjusts the source gain compensation on the
PRG L and PRG R channels of AUDIO OUT. The
source gain compensation is added to the
program volume and is applied equally to both
channels.
Valid analog values range from -100d (-10 dB) to
+100d (+10 dB), adjustable in increments of 0.1
dB. Changing the analog value by 1d signifies a
boost or attenuation of 0.1 decibels.
(continued on next page)
Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 51