Crestron electronic QM-MD5x1 - Manual (Page 5)

Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer
QuickMedia™ Matrix
Switcher/Mixer: QM-MD5x1
Introduction
Features and Functions
The Crestron ® QuickMedia Matrix Switcher/Mixer, QM-MD5x1 (hereinafter
referred to as MD5x1) is part of the Crestron MediaManager line of network devices,
room control systems, and signal routing solutions.
Functional Summary
• Multimedia switcher/mixer with video, audio, RGB, and QuickMedia
inputs
• Two composite/S-video/component video (three BNC connectors)
inputs and two RGBHV (15-pin) inputs with built-in sync sensing
• One RGBHV monitor pass-through connector
• One QuickMedia input port can receive RGB, S-video, composite
video, and multi-channel audio signals from another QM switcher or
QM FlipTop/Wall Plate transmitters.
• One QuickMedia™ output port for connection to QM receivers or other
QM switchers
• Four unbalanced stereo audio inputs
• Two-channel MIC mixer mixes QM microphone signals with
electronically adjustable 4-band graphic equalization for output to
respective audio mixers and QM outputs
• One line-level, balanced/unbalanced, local audio output consisting of a
stereo program channel and a mono speech channel that follows the
respective QM output (Audio Output same as QM Output)
• Mixer at the local audio output allows independent mixing of left
program, right program, and microphone signals for each local output
channel
• Local audio output features electronically adjustable volume, bass,
treble, mute and 12-band parametric/graphic equalizer
• Separate switching of audio and video portions of each input signal
(continued on next page)
Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 1