Crestron electronic QM-MD5x1 User Manual

Page 32

Text mode
Original mode

QuickMedia™ Matrix Switcher/Mixer

Crestron QM-MD5x1

The Input Switching symbol provides two methods for sending switching commands
to the MD5x1:

1. By programming the digital and analog signals, or

2. By programming serial strings.

The two methods should not be used simultaneously.

While using the SIMPL Windows Programming Manager, double-click on Slot 1 of
the QM-MD5x1 to view the details of the Input Switching symbol as shown in the
following diagram.

Input Switching Symbol (Slot 1) in SIMPL Windows Programming Manager

NOTE: The symbol image has been altered to fit the page.

• QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1

Operations Guide - DOC. 6300