Crestron electronic QM-MD5x1 - Manual (Page 40)

QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1
QM-MD5x1, Slot 2 Analog Input Signal Descriptions
INPUT DESCRIPTION
Mic1EQ1ToSave through
Mic1EQ4ToSave Sets the four MIC 1 EQ trims (at 160Hz, 500Hz,
1.2kHz, and 3kHz) that will be saved when
SaveMicEQPreset is held high.
The preset will be saved in the preset number
defined by MicEQPreset#ToSave.
Valid analog values range from –120d (-12 dB) to
+120d (+12 dB), adjustable in increments of 0.1
dB. Thus changing the analog value by 1d
signifies a boost or attenuation of 0.1 decibels.
Mic2EQ1ToSave through
Mic2EQ4ToSave Sets the four MIC 2 EQ trims (at 160Hz, 500Hz,
1.2kHz, and 3kHz) that will be saved when
SaveMicEQPreset is held high.
The preset will be saved in the preset number
defined by MicEQPreset#ToSave.
Valid analog values range from –120d (-12 dB) to
+120d (+12 dB), adjustable in increments of 0.1
dB. Thus changing the analog value by 1d
signifies a boost or attenuation of 0.1 decibels.
MicEQPreset#ToSave Sets the preset number where the eight EQ trims
for MIC 1 and MIC 2 will be saved when
SaveMicEQPreset is driven high.
Valid analog values range from 1d to 16d. Out-
of-range values are ignored.
MicMixEQPreset# Sets the Mic Mix preset number that will be
recalled when RecallMicMixEQPreset is held
high.
Recalling a preset applies the eight EQ trims to
each band (160Hz, 500Hz, 1.2kHz, and 3kHz) of
the MIC A-1 and MIC A-2 equalizers.
Valid analog values range from 1d to 16d. Out-
of-range values are ignored.
MicA-1ToMicMixEQTrim1
through
MicA-1ToMicMixEQTrim4 Sets the four MIC A-1 EQ trims (at 160Hz,
500Hz, 1.2kHz, and 3kHz).
Valid analog values range from –120d (-12 dB) to
+120d (+12 dB), adjustable in increments of 0.1
dB. Thus changing the analog value by 1d
signifies a boost or attenuation of 0.1 decibels.
MicA-2ToMicMixEQTrim1
through
MicA-2ToMicMixEQTrim4 Sets the four MIC A-2 EQ trims (at 160Hz,
500Hz, 1.2kHz, and 3kHz).
Valid analog values range from –120d (-12 dB) to
+120d (+12 dB), adjustable in increments of 0.1
dB. Thus changing the analog value by 1d
signifies a boost or attenuation of 0.1 decibels.
QM-MD5x1, Slot 2 Analog Output Signal Descriptions
OUTPUT DESCRIPTION
MicA-1ToMicMixEQTrim1_F
through
MicA-1ToMicMixEQTrim4_F Indicates the trim being applied to each band of
the MIC A-1 equalizer.
MicA-2ToMicMixEQTrim1_F
through
MicA-2ToMicMixEQTrim4_F Indicates the trim being applied to each band of
the MIC A-2 equalizer.
36 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300