Drucker Diagnostics Model 853VES Centrifuge - Manual (Page 4)

04
Any use other than those specified by the Manufacturer is explicitly prohibited.
Maximum sample density is 1.15 grams / mL, (water density = 1.0 grams / mL)
*Check Serial Number Badge for Your Model Specific Voltage Requirement.
Permitted Environmental Conditions
Electrical Requirements
Overall Dimensions (H x W x D): ............... 8.5˝ x 12.5˝ x 15.5˝
Centrifuge Motor: ...................................... 1/2 H.P. Brushless DC
Protection Breaker: ................................... 4 Amp. re–settable
Timer: .......................................................... Electronic, with hold or 0 to 99 minutes, +/- 1%
Weight: ........................................................ 30 lbs.
Ambient Temperature During Operation: 2 o C - 40 o C
Maximum Relative Air Humidity: .............. 90%
Power (Watts): ............................................ 200
Voltage (Volts): standard: ........................... 115 (+/- 10)*
optional: ............................ 230 (+/- 20)*
853VES: ............................ 115 Volts
853VES 230V: ................... 230 Volts
Frequency (Hz): .......................................... 50/60
Specifications
General Specifications for the Horizon Model 853VES Centrifuge
Contact your authorized dealer or The Drucker Co. to order accessories.
75 mm Tube Holder
p/n 7713043
100 mm
Tube Holder
p/n 7713040
125 mm
Tube Holder
p/n 7713044
Tube Holder Cap
p/n 7713011
7786024 Comes with Twelve 12 of each of the tube holders listed
75 mm tube holder 7713043 12 17 mm x 75 mm 500 to 4,000 RPM 40 to 2,000 xg
100mm tube holder 7713040 12 17 mm x 100 mm 500 to 4,000 RPM 40 to 2,400 xg
12-Place Horizontal
Rotor (Standard)
7786044 Comes with 6 of the holders listed
50 mL Fixed-angle 7787051 6 34 mm x 125 mm 500 to 4,000 RPM 40 to 2,000 xg
7786042 Comes with Twenty 20 of each of the tube holders listed
75 mm tube holder 7713043 20 17 mm x 75 mm 500 to 4,000 RPM 40 to 1,700 xg
100 mm tube holder 7713040 20 17 mm x 100 mm 500 to 4,000 RPM 40 to 1,900 xg
125 mm tube holder 7713044 20 17 mm x 125 mm 500 to 4,000 RPM 40 to 2,000 xg
7786010 Comes with Twelve 12 of each of the tube holders listed
75 mm tube holder 7713043 12 17 mm x 75 mm 500 to 5,000 RPM 40 to 1,100 xg
100 mm tube holder 7713040 12 17 mm x 100 mm 500 to 5,000 RPM 40 to 3,800 xg
PART NO. # MAX TUBE SIZE SPEED RANGE FORCE RANGE
6-Place 50 mL
Fixed-angle Rotor
20-Place Fixed-angle Rotor
12-Place Performance
Plus Horizontal Rotor
50 mL Tube Holder
Fixed-angle p/n
7787051
1˝ Cushion Spacer
p/n 1525