Drucker Diagnostics Model 642VFD Centrifuge - Manual

Operator’s Manual
Model 642VFD • Laboratory Centrifuge Rev. C
Replacement Parts:
Part No. Description
7724037 Foot, rubber
7751068 Switch, lid safety
7786021 Rotor, six-place, horizontal
7735049 Motor, 1/30 H.P., 115 V.A.C. permanent split capacitor
7729006 Capacitor, 4uF, 250V A.C.
7717038 Electronic timing and locking board
7751043 Circuit Breaker
7760002 Power Cord
7714101 Pawl, latch, lid
7714103 Knob, latch, lid
7712316 Lid
7724071 Hinge, friction
7732018 Seal, lid gasket
7713031 Red Tube Holder, for 17mm x 100mm tubes
7713033 Green Tube Holder, for 17mm x 75mm tubes
Available Accessories:
WARRANTY:
The Drucker Company warranties that this centrifuge is free from
defects in workmanship and parts for 12 months.
P/N 7711046
p/n 9150
0.25” Tube Cushion
Protected by U.S. patent # 6,811,531
Six (6) 100 mm
Carriers
p/n 7713031
Six (6) 75 mm
Carriers
p/n 7713033
Rotor, six-place,
horizontal
p/n 7786021
Programmable
Run Time is Factory
Preset to 10
MINUTES
See Page 5
1” Tube Cushion
p/n 1525
Shield Caps
p/n 7713011
Made in the USA by
200 Shadylane Drive, Philipsburg, PA 16866 U.S.A.
Phone: +1-814-692-7661 Fax: +1-814-692-7662
www.druckercompany.com