Drucker Diagnostics Model 755VES Centrifuge - Manual (Page 9)

09
1. Opposing tube holders must be identical.
2. Opposing tube holders must be empty or loaded equally
weighted samples.
3. If an odd number of samples is to be spun, use a water-filled
tube to mate with the unpaired one.
Your centrifuge must contain a balanced load in order to work
properly. To ensure that the load is balanced, keep these rules
in mind when inserting test tube samples into the 6 place, 50
mL fixed-angle rotor:
This rotor is designed to hold up to six (6) 50 mL tube holders.
Six (6) Place 50 mL Fixed-angle Rotor (optional)