Warranty, Warning – Drucker Diagnostics Model 755VES Centrifuge User Manual

Page 3

For the safety of both the operator and service personnel, care should be taken when

using this centrifuge if handling substances that are known to be toxic, radioactive or

contaminated with pathogenic microorganisms. When Risk Group II materials are used (as

identified in the World Health Organization “Laboratory Bio-Safety Manual”), a Bio-Seal

should be employed. In the event that materials of a higher risk group are being used,

more than one level of protection must be provided. The use of flammable or explosive

materials as well as those materials which have a vigorous chemical reaction is prohibited.

Supplied Accessories (Standard)

See next page for optional rotor/accessories

Model Description

The Horizon Model 755VES, Premier, features the largest

holding capacity of Drucker’s Performance Series centrifuges.

Its standard horizontal rotor and carriers can accommodate up

to 24 test tubes. The 755VES offers control over almost every

aspect of the unit’s operation from variable acceleration and

deceleration to easy time and speed input. High speed and

force capability produces platelet-poor/free plasma and greatly

reduces processing times. The exclusive Drucker horizontal

rotor allows for quick and easy sample loading and complete

horizontal separation. Save settings in one of 10 memory

locations and recall them at the touch of a button.

WARRANTY:

The Drucker Company warranties that this centrifuge is free from

defects in workmanship and parts for 2 years.

See the next page for a description of optional accessories.

Also included (not shown):

• One (1) 10´ Line Cord
• One (1) Operator’s Manual
• Twenty-Four (24) 0.25

Cushions for Glass Tubes

Intended Use

General purpose laboratory centrifuge for sample separation.

WARNING

Providing Quality Centrifuges since 1932

Made in the USA by

One (1) 6-Carrier

Horizontal Rotor*

p/n 7786015

Six (6) 4-Place Carriers*

p/n 7713023

Six (6) Carrier Cap*

p/n 7713035

*The rotor and rotor accessories are

rated for a rotational speed of 3800

RPM (a force of 2560 xg).

200 Shadylane Drive • Philipsburg, PA 16866

Phone: 814-342-6205 or 814-692-7661 • Fax: 814-692-7662 • www.druckercompany.com