Drucker Diagnostics Model 755VES Centrifuge - Manual (Page 4)

04 Any use other than those specified by the Manufacturer is explicitly prohibited.
Maximum sample density is 1.15 grams / mL, (water density = 1.0 grams / mL)
*See label on rear of centrifuge for voltage requirements.
Permitted Environmental Conditions
Electrical Requirements
Overall Dimensions (H x W x D): ............... 10.5˝ x 14.5˝ x 17˝
Centrifuge Motor: ...................................... 1/2 H.P. Brushless DC
Protection Breaker: ................................... 4 Amp. re–settable
Timer: .......................................................... Electronic, with hold or 0 to 99 minutes, +/- 1%
Weight: ........................................................ 39 lbs.
Ambient Temperature During Operation: 2 o C - 35 o C
Maximum Relative Air Humidity: .............. 90%
Power (Watts): ............................................ 200
Voltage (Volts): standard: ........................... 115 (+/- 10)*
optional: ............................ 100 (+/- 10)*; 230 (+/- 20)*
Frequency (Hz): .......................................... 50/60
Specifications
General Specifications for the Horizon Model 755VES Centrifuge
Contact your authorized dealer or The Drucker Co. to order accessories.
7786015 Comes with your choice of 6 of the holders listed
w/4-Place Carrier 7713023 24 17 mm x 100 mm 500 to 3,500 RPM 40 to 2,200 xg
w/4-Place Carrier 7713023 12 17 mm x 125 mm 500 to 3,500 RPM 40 to 2,200 xg
w/50 mL Hor. Carrier 7713037 6 34 mm x 115 mm 500 to 3,500 RPM 40 to 2,200 xg
6-Carrier Horizontal
Rotor (Standard)
7786044 Comes with 6 of the holders listed
50 mL Fixed-angle 7787051 6 34 mm x 125 mm 500 to 4,000 RPM 40 to 2,000 xg
Microplate Rotor 7786051 2 96 Well Microplate 500 to 1,500 RPM 35 to 320 xg
PART NO. # MAX TUBE SIZE SPEED RANGE FORCE RANGE
6-Place 50 mL
Fixed-angle Rotor
4-Place Carrier
p/n 7713023
50 mL Carrier
p/n 7713037
50 mL Tube Holder
fixed-angle p/n
7787051
Carrier Cap
p/n 7713035
0.25 ˝ Tube Cushion
p/n 9150
.5 to 1 mL
Tube Adapter
p/n 7713068
13 x 75 mm Insert
p/n 7713064
13 x 100 mm Insert
p/n 7713066
1.5 to 2 mL
Tube Adapter
p/n 7713065