Dogtra eF-3000 - Manual (Page 8)

15
TRANSMITTER
Wall-Mount Transmitter
Use the (2) included screws to mount the
transmitter to a wall, securely, near any standard 110-
volt household outlet. The unit will withstand
freezing temperatures, but it is not waterproof.
Therefore, we recommend mounting the transmitter
in a safe, dry sheltered area such as a shed, garage or
carport. Plastic anchors have been provided to secure
mounting onto drywall. Use a 1/4” drill bit to make
holes into the drywall. Insert the anchors into the
holes so that the open end faces out and mount the
transmitter by inserting the screws into the open end
of the anchors.
To power the wall transmitter, plug the AC
adaptor into the standard 110-volt outlet and connect
it to the adaptor jack connector of the transmitter.
14
Adaptor Jack Connector
Plug the 110-volt adaptor into a 110-volt wall
outlet and insert the adaptor plug into the adaptor
jack connector of the transmitter.
TRANSMITTER
110-volt
25V 500mA
Adaptor Jack Connector