Dogtra eF-3000 - Manual (Page 7)

13
TRANSMITTER
Wire Connectors For Splicing
The easy-to-use push-release wire connectors
let you instantly connect or disconnect the
boundary wire leads. Wires should be stripped
approximately a half-inch before being inserted
into the red connectors on the bottom of the wall
mount transmitter.
comes with a ground wire to
protect the unit in the event of lightning/power
surge. Strip about a half-inch on each end of the
ground wire and insert one end into the black
connector on the bottom of the wall transmitter.
The other end should be buried into the ground or
wrapped around a water pipe and secured with
electrical tape.
Option : A lightning/surge protector can be
purchased if there are no grounding options near
the wall transmitter.
12
Wire Indicator Light
When the wires are connected properly, the
wire indicator light will be on. In the event the
e-Fence wire becomes damaged, the light will
automatically turn off.
TRANSMITTER
Wire Indicator Light
Wire Connectors