Dogtra eF-3000 - Manual (Page 16)

31
ADDITIONAL PARTS
You will want to keep a signal field (area where
the dog will receive stimulation) of at least 6-8 feet
on each side of the wire. In addition, your dog will
keep 2-4 feet away from the signal field, so an
overall signal field of 8-12 feet is preferred. Avoid
making passageways that are too narrow (i.e. along
the sides on a house) or your dog may hesitate from
using them.
Tools
To install your e-Fence, you will need a flat-edge
spade, Phillips screwdriver and a wire cutter/stripper.
If your layout calls for the wires to be connected
across concrete, you will also need a caulking gun,
exterior silicon caulk and a circular saw with a
masonry blade for cutting the pavement.
30
ADDITIONAL PARTS
ADDITIONAL PARTS
18 ga Underground Fence Wire (500 feet)
Boundary Training Flags (50 ea)
The figures on p.29 are indicated for a
rectangular layout. Actual flag/wire requirements
may vary depending on the layout you’ve chosen.